PDO Mekaddishkem Services Limited
POWER YOUR
WORLD.
Premium Deye solar energy systems engineered around the way you actually use electricity — not around what we happen to have in stock.
- Deye Hybrid Inverters
- Deye Lithium Batteries
- JinkoSolar Panels
Featured
Deye 10kW Hybrid
230 V / 50 Hz
Single phase
The Range
THE POWER BEHIND YOUR ENERGY
Premium components. Intelligent system design. Reliable power.
Deye Hybrid Inverters
The decision-making core of the system. Deye units switch between solar, storage, mains and generator without dropping your load — and every unit we supply is specified at 230 V / 50 Hz.
Deye Lithium Batteries
LiFePO4 storage rated beyond 6000 cycles, with integrated BMS and up to 32 units in parallel. Storage that grows with your load instead of being replaced.
JinkoSolar Panels
N-type TOPCon bifacial modules with low temperature coefficients — which is what actually matters on a 38 °C afternoon in Lagos — and a 30-year linear power warranty.
System Sizing
Stop guessing
what you need.
Tell us what you run and for how long. Our sizing tool calculates your real daily consumption, your peak demand and your overnight reserve — then recommends the exact inverter, battery bank and array to match.
It takes about two minutes, it accounts for where in Nigeria you are, and it gives you a specification you can hold us to.
Worked example
Sized4-bedroom home, Lagos
2 × 1.5 HP air conditioners, chest freezer, double-door fridge, 14 lights, 1.5 HP borehole pump, 55″ TV, 2 laptops and a router.
- Daily energy use
- 22.04 kWh
- Peak demand
- 2.9 kW
- Inverter
- Deye 6kW
- Battery
- 2 × 10.64 kWh
- Array
- 10 × 650 W
Figures produced by the same engine that runs on the sizing page. Your own result will differ — that is rather the point.
Why PDOM Hub
We do not
sell equipment.
We work out what your property actually needs, and then supply exactly that. The difference shows up on the first night the grid goes down.
Sized to your load, not our stock
We start from your appliances, your hours and your location — then specify the inverter, battery and array that meet it. If a smaller system is the right answer, that is the answer you get.
Specified for the Nigerian grid
Every unit we supply is 230 V / 50 Hz. Generator input, grid passthrough and battery charging strategy are configured for unstable supply, not for a European feed-in tariff.
Components with real warranties
Deye inverters carry 5 years extendable to 10. Deye LiFePO4 batteries are rated beyond 6000 cycles. JinkoSolar modules carry a 30-year linear power warranty.
Installed, commissioned, supported
Site survey, load audit, mounting, cabling, protection, commissioning and handover. We configure the inverter properly and show you how to read it.
- Nigerian grid specification
230V / 50Hz
Nigerian grid specification
- Battery cycles rated
6000+
Battery cycles rated
- Panel power warranty
30 yr
Panel power warranty
- Installation coverage
Nationwide
Installation coverage
Our Work
INSTALLED. COMMISSIONED. RUNNING.
Photographs from our own installations — not a stock library. This is what the work looks like when it is done properly.
Completed rooftop array on a residential property
Dual-bank layout either side of the ridge, rail-mounted on profiled sheet roofing.
Commissioned wall-mounted system
Deye hybrid inverter and lithium battery, live at 53% state of charge.
Inverter and rack battery bank
Stacked Deye modules with breaker board and distribution enclosure.
Rooftop installation in progress
Module placement and clamping on a Lagos residential roof.
Wall-mounted Deye hybrid inverter
Interior installation with clear service access either side.
Deye 6kW inverter on delivery
Unit checked against the order before installation, modules staged behind.
Deye rack-mount lithium module
Inspection prior to rack assembly and BMS commissioning.
How We Work
From question
to power on.
Five steps, in order, with nothing hidden in the middle.
- 01
Size the system
Use the sizing tool, or talk it through with us. We establish your daily consumption, your peak demand and how much of it falls after dark.
- 02
Consultation and survey
We review the result with you and survey the property — roof orientation, available area, distribution board, cable routes and mounting surface.
- 03
Specification and quotation
You receive a written specification naming every component, the array layout and the protection devices, with a firm price against it.
- 04
Installation and commissioning
Mounting, cabling, protection and termination to standard. The inverter is configured for your load profile and generator, then tested under load.
- 05
Handover and support
We show you how to read the system, what the numbers mean and when to call us. Warranty support continues for the life of the equipment.
Intelligent Solar Energy. Reliable Power.
Find out exactly what your property needs.
Two minutes with the sizing tool, or one conversation with our team. Either way you end up with a specification rather than a guess.
Monday – Saturday, 8:00 – 18:00 WAT